Welding Word Search

Find welding words from Torch and Sparks to Slag, Porosity, and the Oxyacetylene flame.

  • Up to 31 words
  • Easy to hard
  • Large print version
  • Answer key included
  • Teens & adults
0 of 20 found 0:00
SPATTEROSTEELI
LLNLDSSNXWOVPB
AVUWUKCLAMPRDP
GMICRMFFSGTUCL
QLTAYOIEUEMDRH
SLPJCYLNMSZTDE
ZSCQUGLLUVIODJ
URZAGBEADMUORO
IXHORHRSJCRENI
DJGLICRZPTDEQN
FJSSNDOLCLMCXT
EAKKDLDEEAMHUK
GLOVESLWLLILOZ
XZVFREAFMETALG

Drag across a word, or tap its first and last letters.

Next: Westward Expansion Word Search

Puzzles print on one page. Answer keys go on a separate page so you can keep them back.

Paper size

About this puzzle

Welding joins metal with heat, and it comes with a vocabulary all its own. This puzzle starts with the gear and basics anyone in a shop knows: the Welder, Helmet, Gloves, Goggles, Torch, and the bright Arc. Next come the parts of the job, like the Electrode, the Filler Rod, the Clamp that holds a Workpiece, and the Slag left behind on a fresh Bead.

The harder words reach into technique and metallurgy, with Tungsten, Shielding Gas, Amperage, Porosity, and the difference between Brazing and Soldering. It works for high school shop and CTE classes, welding program students, and anyone who spends their days under a hood. The notes give clear, plain definitions that make it a handy review.

The 31 words in this puzzle

Every word, with a short note. Handy for teaching the vocabulary before or after solving.

In every version (12)

Arc
An electric arc is a bright, very hot spark of electricity jumping across a gap. Arc welding uses this heat, which can reach thousands of degrees, to melt metal.
Bead
A bead is the line of melted and cooled metal left by a weld. Smooth, even beads are a sign of good technique.
Flame
Gas welders adjust the flame by changing the mix of fuel and oxygen. A neutral flame has balanced amounts of both.
Gloves
Thick leather welding gloves protect hands from heat, sparks, and ultraviolet light. TIG welders often use thinner gloves for better control.
Goggles
Shaded goggles protect the eyes during gas welding and cutting. Arc welding needs a helmet with a darker lens because its light is much stronger.
Helmet
A welding helmet protects the eyes and face from bright light, heat, and sparks. Auto-darkening helmets darken the lens the instant the arc starts.
Joint
A joint is where two pieces of metal meet to be welded. Common types include butt, lap, corner, tee, and edge joints.
Metal
Welding joins pieces of metal by melting them so they fuse together. Common welded metals include steel, stainless steel, and aluminum.
Sparks
Sparks are tiny bits of hot metal thrown off during welding and grinding. Welders wear flame-resistant clothing to stay safe from them.
Steel
Steel is iron mixed with a small amount of carbon. Mild steel is the most commonly welded metal and a favorite for beginners to practice on.
Torch
A torch mixes gas and oxygen to make a hot flame for welding, cutting, or heating metal. Torches are also used for brazing and soldering.
Welder
A welder can be the person doing the work or the machine that powers it. Welders build everything from bridges and ships to farm equipment.

Added in Medium and Hard (8)

Aluminum
Aluminum is light and strong but tricky to weld because it conducts heat quickly and forms a tough oxide layer on its surface.
Clamp
Clamps hold metal pieces firmly in place so they don't shift during welding. A ground clamp also completes the electrical circuit.
Electrode
An electrode carries electric current to the weld. Some electrodes melt into the weld as filler, while tungsten electrodes do not melt away.
Filler Rod
A filler rod adds extra metal to the weld pool. In TIG and gas welding, the welder feeds it in by hand.
Fusion
Fusion is the melting and joining of metals into one solid piece. A strong weld has full fusion between the filler and the base metal.
Grinder
An angle grinder smooths welds, cleans metal before welding, and cuts material. Grinders throw sparks, so eye and face protection are a must.
Slag
Slag is the crusty layer that forms over some welds as flux melts and hardens. Welders chip and brush it away to see the bead underneath.
Spatter
Spatter is little drops of molten metal that fly out and stick near a weld. Correct settings and clean metal help reduce it.

Added in Hard (11)

Amperage
Amperage is the amount of electric current flowing through the weld. Higher amperage produces more heat and is used for thicker metal.
Brazing
Brazing joins metal with a filler that melts above about 840 degrees Fahrenheit, but without melting the base metals themselves.
Fillet
A fillet weld joins two pieces that meet at an angle, such as in a tee or lap joint. Its cross section is roughly triangular.
Flux
Flux is a material that protects molten metal from the air and cleans the surface. Flux-core wire has flux built into its center.
Oxyacetylene
Oxyacetylene welding burns acetylene gas with pure oxygen. It makes one of the hottest flames of any common fuel gas.
Porosity
Porosity is tiny gas bubbles trapped inside a weld. It weakens the joint and is often caused by dirty metal or poor gas coverage.
Shielding Gas
Shielding gas, such as argon or carbon dioxide, surrounds the weld and keeps air away from the molten metal so the weld stays clean and strong.
Soldering
Soldering joins metal with a filler that melts at a low temperature, below about 840 degrees Fahrenheit. It is common in electronics and plumbing.
Tungsten
Tungsten has the highest melting point of any metal. TIG welding uses a tungsten electrode because it can stand the heat without melting away.
Ventilation
Good ventilation pulls welding fumes away from the welder's face. Shops use fans and fume extractors to keep the air safe to breathe.
Workpiece
The workpiece is the metal being welded. Cleaning it of rust, paint, and oil first helps produce a strong, clean weld.

A few facts to share while you solve

  • Two clean pieces of metal can stick together in the vacuum of space with no heat at all, an effect called cold welding.
  • Tungsten, used in TIG welding electrodes, has the highest melting point of any metal.
  • Blacksmiths practiced forge welding for thousands of years, heating iron and hammering pieces together until they joined.

Four versions of this puzzle

Pick a version with the buttons above the grid. Each one has its own grid and answer key, and your progress on each is saved separately in this browser.

VersionWordsGridDirections
Easy 12 10 × 10 The 12 most familiar words, reading forward across and down.
Medium 20 14 × 14 Twenty words across, down and diagonally. No backwards words.
Hard 31 16 × 16 Every word, in all eight directions including backwards, with look-alike filler letters.
Large print 12 10 × 10 The 12 most familiar words on a small grid with big letters. No backwards words.

Hard and large print versions

Hard welding word search: all 31 words on a 16 × 16 grid, hidden forward, backward, up, down and along both diagonals, with filler letters borrowed from the word list. Print it without the word list for an extra challenge. Play the hard version, or see all hard word searches.

Large print welding word search: the 12 most familiar words on a 10 × 10 grid, printed with big letters and a big word list, and no backwards words. Play the large print version, or see all large print word searches.

Printing this word search

Press Print / PDF above the puzzle. You get a clean one-page sheet with the title, the grid, a word list with tick boxes, and optional name and date lines. The answer key prints on a second page. Prefer a file? Download it as a PDF or an image to print later or drop into a worksheet. Whatever version is showing on screen is the one that prints, and the large print version prints with bigger letters.

How to play online

  1. Find a word from the list in the grid. Scanning for its first letter is the quickest way.
  2. Drag across the word from its first letter to its last. On a phone, you can also tap the first letter, then the last.
  3. Found words get highlighted and crossed off. Stuck? Hint circles the first letter of a word you haven’t found.

Read the full guide to solving word searches, with tips that make big grids much faster.

Questions and answers

Is the welding word search good for shop class?

Yes. It mixes safety gear, tools, and process terms that shop and CTE students learn early, like Helmet, Clamp, Electrode, and Slag. Easy uses 12 basic words, while Hard has up to 31, including Amperage, Porosity, and Shielding Gas for advanced students.

What is the difference between Brazing and Soldering in the puzzle?

Both join metal with a melted filler without melting the base metal. The difference is temperature. Soldering uses fillers that melt below about 840 degrees Fahrenheit, while brazing uses fillers that melt above it. Welding, by contrast, melts the base metals themselves.

Is there an answer key for this welding word search?

Yes. Choose Print / PDF above the puzzle and keep “Add an answer key page” ticked. The key prints on its own page, with every word highlighted. While playing online, Show answers outlines any words you haven’t found yet.

Can I print copies for my class or group?

Yes. Every puzzle on BetterWordSearch is free to print for personal, classroom, library and homeschool use. Print as many copies as you need. To change the words or make several different versions of the grid, use the word search maker.

What changes between Easy, Medium, Hard and Large print?

Easy hides the 12 most familiar words, reading left to right and top to bottom. Medium uses 20 words and adds diagonals. Hard hides all 31 words in every direction, including backwards, with look-alike filler letters. Large print uses the same words as Easy on a small grid and prints with big letters.